Back Cushion Rejuvenation

Most furniture ships with back cushions filled with either polyester or a down/feather blend and sometimes with down/feather blended with polyester.  With normal use the polyester filled inserts will start to show wear and begin to sag.

We were recently brought some sagging fiber/down filled backs.  Fiber/down is the filling that blends down/feather with polyester.  Although down/feather on it's own is fluffable, once it's blended with polyester it gets tangled in the poly fibers and as the batting wads up and flattens, so too does the down/feather.  These cushions had lost their fullness, were drooping severely and provided no support (the picture below says it all) for their owners.

We emptied the backs of the fiber/down filling, as you can see it comes out in ropey bands of wadded up polyester and feathers.

After emptying the tick, we refilled it with Cluster Fiber, making the insert very firm, supportive and full.

Lots of Cluster Fiber filled into the existing tick makes the insert much fuller and firmer than before.

The new cushion is dramatically fuller than the old cushion.

By the way, we never mix down/feather with polyester.  Either we make a polyester filled cushion which is firm, or a down/feather cushion which is fluffable, or a foam core poly

The Boxing Panel

The measurement of the boxing panel of a seat or back cushion is crucial in determining the thickness of foam that we will use.  Our approach is to use a thickness of foam that is the same dimension as the height of the boxing, i.e. 3" boxing on the cover gets a 3" thick foam core.  The foam is the firmest part of the cushion and we want the edge of the foam to line up with the seams of the cover and hold them straight.  The material that is wrapped around the foam, whether it be polyester, down/feather or wool, just adds to the total thickness of the cushion, which we call the "crown".

Toss Pillows - Three Different Seams

A toss pillow can be cut and sewn a couple of different ways.

A Knife Edge (left) is just two pieces of fabric that are sewn together.  

A Boxed pillow (center) has a band of fabric sewn between the front and back panels which allows for more fullness.  

A pillow with Cut-Outs (right) is similar in fullness to the boxed pillow, but still has a single seam around the perimeter like a Knife Edge pillow.  The third dimension is achieved by the perpendicular cut-outs at each corner.

Left - Boxed Pillow
Right - Cut-Out Pillow